Plain Weave Wire Mesh

Plain Weave Wire Mesh types specification:

Type 1
Nr 24/15,5 (24 wires of warp on 1cm/ 15,5 wires of weft on 1cm).
Material: stainless steel 1.4301 DIN , AISI 304.
Diameter of warp - 0.20mm.
Diameter of weft - 0.25mm.
Aperture: 0.21 × 0.40mm.
Width of cloth: 1500; 1800; 3200; 4500mm.

Type 2
Nr 24/15,5 (24 wires of warp on 1cm/ 15,5 wires of weft on 1cm).
Material: stainless steel 1.4301 DIN , AISI 304.
Diameter of warp - 0.25mm.
Diameter of weft - 0.27mm.
Aperture: 0.167 × 0.375mm.
Width of cloth: 1500; 1800; 3200; 4500mm.

Type 3
Nr 24/15,5 (24 wires of warp on 1cm/ 15,5 wires of weft on 1cm).
Material:
Diameter of warp - 0.25mm ( phosphor bronze CuSn6 ).
Diameter of weft - 0.27mm ( brass CuZn20 ).
Aperture: 0.167 × 0.375mm.
Width of cloth: 1500; 1800; 3200; 4500mm.

Type 4
Nr 18/16 (18 wires of warp on 1cm/16 wires of weft on 1cm).
Material: stainless steel 1.4301 DIN , AISI 304.
Diameter of warp - 0.25mm.
Diameter of weft - 0.25mm.
Aperture: 0.305 × 0.375mm.
Width of cloth: 1500mm.

Type 5
Cylinder type: Nr 24/15,5 (24 wires of warp on 1cm/ 15,5 wires of weft on 1cm)
Material: 1.4541 DIN ( stainless steel)
Diameter of warp - 0.20mm.
Diameter of weft - 0.25mm.
Aperture: 0.21 × 0.40mm.
Height of cylinder - 1500mm.
Diameter of cylinder - 1000mm.
Type of joint - gold, diagonal.

Type 6
Nr 2 (2 wires of warp on 1cm/ 2 wires of weft on 1cm).
Material: 1.4301 DIN ( stainless steel).
Dimension of wire - 1.80 × 0.60mm (half round).
Aperture: 3.2 × 3.2mm.
Width of cloth: 1500, 1800, 3200, 4200mm.

Type 7
Nr 16/11 (16 wires of warp on 1cm/ 11 wires of weft on 1cm).
Material: 1.4541 DIN ( stainless steel).
Diameter of warp - 0.28mm.
Diameter of weft - 0.35mm.
Aperture: 0.345 × 0.559mm.
Width of cloth: 3500mm.
Length of cloth: 13850mm.
The edges should not be cut on both sides.